You are here: Home > PUMPS/POWERHEADS > Aquarium Pumps:
Reef Octopus Water Blaster

Pumps: Reef Octopus Water Blaster
Sort By:
Page of 1
Reef Octopus Water Blaster HY-1000W Pump
Reef Octopus Water Blaster HY-1000W Pump, 13 watts, 250 gph
Our Price (price includes free shipping!) $144.99
In Stock

The Reef Octopus Water Blaster HY-1000W Pump is based off the same design as the popular Bubble Blaster skimmer pumps, but they're intended to thrust large amounts of water. These pumps feature a digital control circuit board inside that controls directional start up and RPM speeds. The smart circuit board will shut the pump off if it detects a problem that could otherwise have shortened the life of the pump. The Silicone Nitride shafts and bearings deters calcium buildup on the rotor unlike ceramic. This means less maintenance and cleaning and more time for you to enjoy your aquarium instead of working on it.
  • For submersible or external use
  • For saltwater and freshwater use
  • Low wattage—only 15 watts. 90% efficiency.
  • Max Water Flow: 250 gph
  • Max Head: 6 ft
  • Dimensions (L x W x H): 7″ x 3.5” x 7″
  • Inlet Size: 3/4” inlet (ID) w/ 1" hose barb fitting
  • Outlet Size: 1/2” outlet (ID) w/ 3/4" hose barb fitting
  • Hard plumb & hose barb connections
  • Low heat
  • 9 ft power cord
  • Rotatable volute
  • Quiet running
  • Digital circuit board
  • Silicon nitride shaft & bearings
  • THIS IS NOT A PRESSURE RATED PUMP. This pump is not ideal for second floor applications or to feed Beckett or downdraft skimmers where consistent pressure is necessary.
  • Replacement pump for: SRO-CR2000C, SRO-CR2000C, BR2000ss
Reef Octopus Water Blaster HY-2000W Pump
Reef Octopus Water Blaster HY-2000W Pump, 22 watts, 550 gph
Our Price (price includes free shipping!) $149.99
In Stock

The Reef Octopus Water Blaster HY-2000W Pump is based off the same design as the popular Bubble Blaster skimmer pumps, but they're intended to thrust large amounts of water. These pumps feature a digital control circuit board inside that controls directional start up and RPM speeds. The smart circuit board will shut the pump off if it detects a problem that could otherwise have shortened the life of the pump. The Silicone Nitride shafts and bearings deters calcium buildup on the rotor unlike ceramic. This means less maintenance and cleaning and more time for you to enjoy your aquarium instead of working on it.
  • For submersible or external use
  • For saltwater and freshwater use
  • Low wattage—only 22 watts. 90% efficiency.
  • Max Water Flow: 550 gph
  • Max Head: 6 ft
  • Dimensions (L x W x H): 7″ x 3-1/2” x 7″
  • Inlet Size: 3/4” inlet (ID) w/ 1" hose barb fitting
  • Outlet Size: 1/2” outlet (ID) w/ 3/4" hose barb fitting
  • Hard plumb & hose barb connections
  • Low heat
  • 9 ft power cord
  • Rotatable volute
  • Quiet running
  • Digital circuit board
  • Silicon nitride shaft & bearings
  • THIS IS NOT A PRESSURE RATED PUMP. This pump is not ideal for second floor applications or to feed Beckett or downdraft skimmers where consistent pressure is necessary.
  • Replacement pump for: SRO-CR2000C, SRO-CR2000C, BR2000ss

Reef Octopus Water Blaster HY-3000W Pump
Reef Octopus Water Blaster HY-3000W Pump, 37 watts, 800 gph
Our Price (price includes free shipping!) $199.99
In Stock

The Reef Octopus Water Blaster HY-3000W Pump is based off the same design as the popular Bubble Blaster skimmer pumps, but they're intended to thrust large amounts of water. These pumps feature a digital control circuit board inside that controls directional start up and RPM speeds. The smart circuit board will shut the pump off if it detects a problem that could otherwise have shortened the life of the pump. The Silicone Nitride shafts and bearings deters calcium buildup on the rotor unlike ceramic. This means less maintenance and cleaning and more time for you to enjoy your aquarium instead of working on it.

  • For submersible or external use

  • For saltwater and freshwater use

  • Low wattage—only 37 watts. 92% efficiency.

  • Max Water Flow: 800 gph

  • Max Head: 9 ft

  • Dimensions (L x W x H): 8.25” x 4.25” x 7.9″

  • Inlet Size: 1” inlet (ID)

  • Outlet Size: 3/4” outlet (ID)

  • Hard plumb & hose barb connections

  • Low heat

  • 9 ft power cord

  • Rotatable volute

  • Quiet running

  • Digital circuit board

  • Silicon nitride shaft & bearings

  • THIS IS NOT A PRESSURE RATED PUMP. This pump is not ideal for second floor applications or to feed Beckett or downdraft skimmers where consistent pressure is necessary.

  • Replacement pump for: SRO-CR3000C, SRO-CR3000C, BR3000ss

Reef Octopus Water Blaster HY-5000W Pump
Reef Octopus Water Blaster HY-5000W Pump, 60 watts, 1300 gph
Our Price (price includes free shipping!) $239.99
(Out of Stock)

The Reef Octopus Water Blaster HY-5000W Pump is based off the same design as the popular Bubble Blaster skimmer pumps, but they're intended to thrust large amounts of water. These pumps feature a digital control circuit board inside that controls directional start up and RPM speeds. The smart circuit board will shut the pump off if it detects a problem that could otherwise have shortened the life of the pump. The Silicone Nitride shafts and bearings deters calcium buildup on the rotor unlike ceramic. This means less maintenance and cleaning and more time for you to enjoy your aquarium instead of working on it.

  • For submersible or external use
  • For saltwater and freshwater use
  • Low wattage—only 60 watts. 97% efficiency.
  • Max Water Flow: 1,300 gph
  • Max Head: 12 ft
  • Dimensions: (L x W x H): 9″ x 4.5” x 8.3″
  • Inlet Size: 1.75” inlet (ID)
  • Outlet Size: 1” outlet (ID)
  • Hard plumb & hose barb connections
  • Low heat
  • 9 ft power cord
  • Rotatable volute
  • Quiet running
  • Digital circuit board
  • Silicon nitride shaft & bearings
  • THIS IS NOT A PRESSURE RATED PUMP. This pump is not ideal for second floor applications or to feed Beckett or downdraft skimmers where consistent pressure is necessary.
  • Replacement pump for: SRO-CR5000C, SRO-CR5000C
Reef Octopus Water Blaster HY-7000W Pump
Reef Octopus Water Blaster HY-7000W Pump, 88 watts, 1840 gph
Our Price (price includes free shipping!) $259.99
(Out of Stock)

  • For submersible or external use
  • For saltwater and freshwater use
  • Low wattage—only 88 watts. 97% efficiency.
  • Max Water Flow: 1,800 gph
  • Max Head: 12 ft
  • Dimensions: (L x W x H): 9″ x 4.5” x 8.3″
  • Inlet Size: 1.25” inlet (ID
  • Outlet Size: 1” outlet (ID)
  • Hard plumb & hose barb connections
  • Low heat
  • 9 ft power cord
  • Rotatable volute
  • Quiet running
  • Digital circuit board
  • Silicon nitride shaft & bearings
  • THIS IS NOT A PRESSURE RATED PUMP. This pump is not ideal for second floor applications or to feed Beckett or downdraft skimmers where consistent pressure is necessary.
Reef Octopus Water Blaster HY-10000W Pump
Reef Octopus Water Blaster HY-10000W Pump, 130 watts, 2700 gph
Our Price (price includes free shipping!) $279.99
In Stock

The Reef Octopus Water Blaster HY-10000W Pump is based off the same design as the popular Bubble Blaster skimmer pumps, but they're intended to thrust large amounts of water. These pumps feature a digital control circuit board inside that controls directional start up and RPM speeds. The smart circuit board will shut the pump off if it detects a problem that could otherwise have shortened the life of the pump. The Silicone Nitride shafts and bearings deters calcium buildup on the rotor unlike ceramic. This means less maintenance and cleaning and more time for you to enjoy your aquarium instead of working on it.
  • For submersible or external use
  • For saltwater and freshwater use
  • Low wattage—only 125 watts. 97% efficiency.
  • Max Water Flow: 2,700 gph
  • Max Head: 16.5 ft
  • Dimensions: (L x W x H): 9.5″ x 5.25” x 8.5″
  • Inlet Size: 1.25” inlet (ID
  • Outlet Size: 1” outlet (ID)
  • Hard plumb & hose barb connections
  • Low heat
  • 9 ft power cord
  • Rotatable volute
  • Quiet running
  • Digital circuit board
  • Silicon nitride shaft & bearings
  • THIS IS NOT A PRESSURE RATED PUMP. This pump is not ideal for second floor applications or to feed Beckett or downdraft skimmers where consistent pressure is necessary.
Reef Octopus Water Blaster HY-12500W Pump
Reef Octopus Water Blaster HY-12500W Pump, 170 watts, 3300 gph
Our Price (price includes free shipping!) $354.99
In Stock

The Reef Octopus Water Blaster HY-12500W Pump is based off the same design as the popular Bubble Blaster skimmer pumps, but they're intended to thrust large amounts of water. These pumps feature a digital control circuit board inside that controls directional start up and RPM speeds. The smart circuit board will shut the pump off if it detects a problem that could otherwise have shortened the life of the pump. The Silicone Nitride shafts and bearings deters calcium buildup on the rotor unlike ceramic. This means less maintenance and cleaning and more time for you to enjoy your aquarium instead of working on it.
  • For submersible or external use
  • For saltwater and freshwater use
  • Low wattage—only 175 watts. 97% efficiency.
  • Max Water Flow: 3,300 gph
  • Max Head: 18.5 ft
  • Dimensions: (L x W x H): 9.3″ x 5.1” x 9.1″
  • Inlet Size: 1.25” inlet (ID
  • Outlet Size: 1” outlet (ID)
  • Hard plumb & hose barb connections
  • Low heat
  • 9 ft power cord
  • Rotatable volute
  • Quiet running
  • Digital circuit board
  • Silicon nitride shaft & bearings
  • THIS IS NOT A PRESSURE RATED PUMP. This pump is not ideal for second floor applications or to feed Beckett or downdraft skimmers where consistent pressure is necessary.
Reef Octopus Water Blaster WB-16000L Pump
Reef Octopus Water Blaster WB-16000L Pump, 250 watts, 4300 gph
Our Price (price includes free shipping!) $399.99
In Stock

The Reef Octopus Water Blaster WB-16000L Pump is based off the same design as the popular Bubble Blaster skimmer pumps, but they're intended to thrust large amounts of water. These pumps feature a digital control circuit board inside that controls directional start up and RPM speeds. The smart circuit board will shut the pump off if it detects a problem that could otherwise have shortened the life of the pump. The Silicone Nitride shafts and bearings deters calcium buildup on the rotor unlike ceramic. This means less maintenance and cleaning and more time for you to enjoy your aquarium instead of working on it.
  • For submersible or external use
  • For saltwater and freshwater use
  • Low wattage—only 250 watts. 93% efficiency.
  • Max Water Flow: 4,100 gph
  • Max Head: 20 ft
  • Dimensions: (L x W x H): 9.3″ x 5.1” x 9.1″
  • Inlet Size: 1.25” inlet (ID
  • Outlet Size: 1.25” outlet (ID)
  • Hard plumb & hose barb connections
  • Low heat
  • 9 ft power cord
  • Rotatable volute
  • Quiet running
  • Digital circuit board
  • Silicon nitride shaft & bearings
  • THIS IS NOT A PRESSURE RATED PUMP. This pump is not ideal for second floor applications or to feed Beckett or downdraft skimmers where consistent pressure is necessary.