You are here: Home > MEDICATIONS > Seachem Medications

Seachem Medications
Sort By:
Page of 1
Seachem CupriSorb 100 ml
Seachem CupriSorb, 100 ml
Our Price: $8.87
In Stock

Seachem CupriSorb is a narrow spectrum, synthetic adsorbent based filter material for removing copper and heavy metals from either freshwater or marine water. It extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous service, it will gradually extract even precipitated copper and make invertebrate culture possible in tanks previously heavily treated with copper.

  • For freshwater & saltwater aquariums
  • A powerful copper specific chelating resin
  • Use 100 ml for every 60 gallons to remove up to 3,000 mg of copper
  • For best results, CupriSorb should be placed so as to maximize the flow of water through it. To remove undetectable substrate leaching copper keep CupriSorb in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter.
Seachem Reef Dip 250 ml
Seachem Reef Dip, 250 ml
Our Price: $10.63
In Stock

Seachem Reef Dip contains elemental iodine complexed to a protective slime coat for safely and gently disinfecting corals. It is effective against bacteria, fungus, and protozoans. It may be used prophylactically (without evidence of disease) or to remedy diseased specimens. It is safe to use with both stony and soft corals. It is also safe for anemones and polyps.

  • Coral disinfectant
  • Use only in a dip container and not in the aquarium. To use, add one capful to 1 gallon in water and place coral specimen in dip for 5-10 minutes, depending on the severity of the problem.
Seachem StressGuard 500 ml
Seachem StressGuard, 500 ml
Our Price: $11.68
In Stock

Seachem StressGuard is the premium slime coat protection product. StressGuard will reduce stress and ammonia toxicity whenever handling or transporting fish. StressGuard also binds to exposed protein in wounds to promote healing of injured fish and to reduce the likelihood of primary and secondary infections.

  • For freshwater & saltwater aquariums
  • Reduces stress for handling & transporting. Antiseptic for fish.
  • Use 1/2 - 1 cap to every 10 gallons daily until signs of stress have abated or healing is complete. The entire 500 ml bottle will treat 1,000 to 2,000 gallons.
  • Compatible with all medications except those that are copper based
  • Not amine based and will not interfere with Purigen or HyperSorb regeneration
  • Does not coat resins or clog filtration like competing “slime coat” type products can
Seachem ParaGuard, 500 ml
Seachem ParaGuard, 500 ml
Our Price: $12.03
In Stock

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, ParaGuard contains no formaldehyde or methanol and will not alter pH. ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites on fish (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot). It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

  • For freshwater & saltwater aquariums
  • Fish & filter safe parasite control
  • Seachem DOES NOT guarantee this product is safe for invertebrates and plants
  • Use one capful for every 10 gallons. Repeat daily as required as long as fish show no stress. The entire 500 ml bottle will treat  1,000 gallons.
Seachem CupriSorb 250 ml
Seachem CupriSorb, 250 ml
Our Price: $14.86
In Stock

Seachem CupriSorb is a narrow spectrum, synthetic adsorbent based filter material for removing copper and heavy metals from either freshwater or marine water. It extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous service, it will gradually extract even precipitated copper and make invertebrate culture possible in tanks previously heavily treated with copper.

  • For freshwater & saltwater aquariums
  • A powerful copper specific chelating resin
  • Use 100 mL for every 60 gallons to remove up to 3,000 mg of copper
  • For best results, CupriSorb should be placed so as to maximize the flow of water through it. To remove undetectable substrate leaching copper keep CupriSorb in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter.
Seachem Cupramine 250 ml
Seachem Cupramine, 250 ml
Our Price: $15.13
In Stock

Seachem Cupramine effectively eradicates Oodinium, Cryptocaryon, Amyloodinium, Ichthyophthirius, and other ectoparasites of both freshwater and marine fish. It is superior to copper sulfate, chloride & citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. It is superior to chelates: it is fully charged (ionic), active at low concentrations, and is removable with carbon.

Instructions for Use:
  • Remove all invertebrates. Turn off UV sterilizer; remove chemical filtration. If the bottle has a dropper cap, use 16 drops per 10.5 gallons the first day, wait 48 hours, then repeat. On non-dropper caps, each inner ring is 1 mL. In freshwater use half dose. Final copper concentration is 0.5 mg/L (0.25 mg/L in freshwater).
  • Leave at this concentration for 14 days. Do not redose without testing with a copper test kit.
  • Do not use in conjunction with any other medication. Remove with carbon or CupriSorb.
Seachem ParaGuard, 2 liters
Seachem ParaGuard, 2 liter
Our Price: $47.71
In Stock

Seachem ParaGuard is the only fish and filter safe aldehyde based (10% by weight) parasite control product available. Unlike highly toxic and difficult to use formalin based medications, ParaGuard contains no formaldehyde or methanol and will not alter pH. ParaGuard employs a proprietary, synergistic blend of aldehydes, malachite green, and fish protective polymers that effectively and efficiently eradicates many ectoparasites on fish (e.g. ich, etc.) and external fungal/bacterial/viral lesions (e.g., fin rot). It is particularly useful in hospital and receiving tanks for new fish and whenever new fish are introduced to a community tank.

  • For freshwater & saltwater aquariums
  • Fish & filter safe parasite control
  • Seachem DOES NOT guarantee this product is safe for invertebrates and plants
  • Use one capful for every 10 gallons. Repeat daily as required as long as fish show no stress. The entire 2 liter bottle will treat  4,000 gallons.
Seachem Cupramine 2 liter
Seachem Cupramine, 2 liter
Our Price: $102.94
In Stock

Seachem Cupramine effectively eradicates Oodinium, Cryptocaryon, Amyloodinium, Ichthyophthirius, and other ectoparasites of both freshwater and marine fish. It is superior to copper sulfate, chloride & citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. It is superior to chelates: it is fully charged (ionic), active at low concentrations, and is removable with carbon.

Instructions for Use:
  • Remove all invertebrates. Turn off UV sterilizer; remove chemical filtration. If the bottle has a dropper cap, use 16 drops per 10.5 gallons the first day, wait 48 hours, then repeat. On non-dropper caps, each inner ring is 1 mL. In freshwater use half dose. Final copper concentration is 0.5 mg/L (0.25 mg/L in freshwater).
  • Leave at this concentration for 14 days. Do not redose without testing with a copper test kit.
  • Do not use in conjunction with any other medication. Remove with carbon or CupriSorb.