Product Code: RAL01547

NOTE: There is only ONE Hanger with each order. Two shown in the picture for demonstration purposes. You will need two Hangers for the AquaticLife T5/HO Hybrid Lights.

WARNING: The Light Fixture Hanger should be mounted into a secure surface only. Do not mount hardware directly into drywall/gypsum board (such as a wall) or any similar material. Mounting hardware MUST be attached with supplied screws into a wood board or wall studs that can handle 100 lbs or more.

The AquaticLife Universal Light Fixture Hanger For T5/HO LED Hybrid (Single) is a premium mounting option that allows you to suspend aquarium light fixtures over your tank and easily attaches to your aquarium stand. It does not come with the suspension hardware. You can use the hardware that comes with the Hybrid.

• Installation Guide
• Horizontal extending arms allow suspension of light fixtures over aquariums up to 30 inches tall
• Adjustable mounting plates allow for use on a wide variety and heights of aquarium furniture
• Adjustable stop collar keeps cables safely secured. Included Zip-ties make power cord management easy.
• Each hanger is rated for a maximum of 10 lbs. Adjustable to 44" high.
• Extension arm max length 13"

Product Code: RAL01627
This AquaticLife Floating Suspension Kit for Hybrid Fixtures, Black (Pair), is designed to mount on the wall behind your aquarium and make it easy to hang your light fixture over the aquarium. Compatible light fixtures include the AquaticLife Hybrid, G2 Hybrid and DX18 Dimmable Hybrid models. Light Fixtures NOT Included.

With the AquaticLife Floating Suspension your fixture is securely attached to the wall behind the aquarium and allows for easy access inside the tank. Designed to blend into the surroundings, the Floating Suspension is black and uses a suspension-bridge cable design to minimize the footprint of the hanger while providing strength. Installation Guide.

Product Code: RAL01281
AquaticLife Hybrid Suspension Cables, Pair, for all T5/HO Hybrid Lights. Includes: Cables, Silver Anodized Housing, Locking Nuts. These Cables are already included with all sizes of all AquaticLife T5/HO Hybrid Lights. AquaticLife Part# 470281. Spec Sheet (pdf in new window).

Product Code: RAL01531
This AquaticLife Hybrid Mounting System 18" Bracket is a direct replacement for the AquaticLife 18" Brackets that comes with every AquaticLife Hybrid (AquaticLife Part# 470531). In certain situations you may want to purchase extra Brackets if you have more lights than typical. The 24" Hybrid already comes with one pair, the 36" two pairs, the 48" three pairs and the 61" four pairs.

• 7.5" x 1.25"
• Pair
• AquaticLife Part# 470531
• For all 18" wide Hybrids
  
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates
  

Product Code: RAL01532
This AquaticLife Hybrid Mounting System 16"/18" Bracket, Rectangular, 7.5" x 5.5" (4" Opening) is a direct replacement for the AquaticLife Brackets that comes with every AquaticLife Hybrid (AquaticLife Part# 470532). The brackets are designed for use with the Kessil A360 & A350 LED Lights. In certain situations you may want to purchase extra Brackets if you have more lights than typical. The 24" Hybrid already comes with one, the 36" two, the 48" three and the 61" four.

• 7.5" x 5.5"
• AquaticLife Part# 470532
• For all 18" wide Hybrids
  
• For Kessil A350 & A360 Lights
  
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates
  

Product Code: RAL01533
This AquaticLife Hybrid Mounting System 16"/18" Bracket, Rectangular, 7.5" x 5.5" (2.5" Opening) is for people that want to use their Hybrid with their Kessil A160 & A150 LED Lights. You will need one 16"/18" Bracket for each Kessil LED Light. You can use this without changing the End Plates if you want your Hybrid to be 18" wide. To convert your Hybrid to a 16" wide fixture with the A160s/A150s you will need to change your Hybrid End Plates to the AquaticLife Hybrid 16" End Plate (15.75"), Pair. The Bracket then needs to be turned sideways to fit in the reduced area between the T5 lights.

• 7.5" x 5.5"
• AquaticLife Part# 470533
• For all 18" wide Hybrids using the Kessil A160 & A150 LED lights and for Hybrids converted to 16" using the A160 & A150 LED lights
  
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates
  

Product Code: RAL01535
This AquaticLife Hybrid 18" End Plate (18.1"), Pair is a direct replacement for the AquaticLife 18" End Plate that comes with every AquaticLife Hybrid (AquaticLife Part# 470535).

• 18.1" x 1.375"
• Pair
• AquaticLife Part# 470535
• For all 18" wide Hybrids
  
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates
  

Product Code: RAL01536
This AquaticLife Hybrid 24" End Plate (23.25"), Pair, replaces the 18" End Plates when widening the Hybrid to 24 inches. This End Plate also includes replacement hanging hardware wires to accommodate the wider fixtures.

You might consider purchasing the AquaticLife T5/HO Hybrid 24" Decor Black Endcaps instead. It includes Endcaps with the End Plates.

• 23.25" x 1.375"
• Pair
• AquaticLife Part# 470536
• For all 24" wide Hybrids
  
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates
  

Product Code: RAL01567
This AquaticLife Hybrid Mounting System 16"/18" Bracket, Rectangular, 7.75" x 5.375" (4.25" Opening) is for people that want to use their Hybrid with their Kessil A360X LED Lights. You will need one 16"/18" Bracket for each A360X LED Light. You can use this without changing the End Plates if you want your Hybrid to be 18" wide. To convert your Hybrid to a 16" wide fixture with the A360Xs you will need to change your Hybrid End Plates to the AquaticLife Hybrid 16" End Plate (15.75"), Pair. The Bracket then needs to be turned sideways to fit in the reduced area between the T5 lights.

• 7.75" x 5.375"
• AquaticLife Part# 470567
• For all 18" wide Hybrids using the Kessil A360X LED lights and for Hybrids converted to 16" using the A360X LED lights
  
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates
  

Product Code: RAL01537
This AquaticLife Hybrid Mounting System 16" Bracket is for people that want to use their Hybrid with the AI Prime. You will need one Pair of 16" Brackets for each AI Prime LED Light. You will also need to change your Hybrid End Plates to the AquaticLife Hybrid 16" End Plate (15.75"), Pair.

• 5.375" x 1.25"
• Pair
• AquaticLife Part# 470537
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates

Product Code: RAL01538
This AquaticLife Hybrid Mounting System 24" Bracket is for those that want to use their AquaticLife Hybrid with the EcoTech Radion XR30w or the AI Hydra 52. You will need one pair of these Brackets for each EcoTech Radion XR30w or AI Hydra 52 LED Light. You will also need to change your Hybrid End Plates to the AquaticLife Hybrid 24" End Plate (23.25"), Pair.

• 12.75" x 1.25"
  
• Pair
• AquaticLife Part# 470538
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates

Product Code: RAL01534
This AquaticLife Hybrid Mounting System 16" End Plate, Pair, is for those that want to use their Hybrid with the AI Prime or the Kessil A160. You will also need one pair of 16" Brackets for each AI Prime LED Light. For the Kessil 160 you will also need to purchase a AquaticLife Hybrid Mounting System 16"/18" Bracket, Rectangular 7.5" x 5.5" (2.5" Opening) for each Kessil Light. If you use this 16" End Plate you can also use the Kessil A360. You can use the 4" Opening Brackets that come with the Hybrid. Just turn the Bracket sideways.

You might consider purchasing the AquaticLife T5/HO Hybrid 16" Decor Black Endcaps instead. It includes Endcaps with the End Plates.

• 15.875" x 1.375"
• Pair
• AquaticLife Part# 470534
• Hybrid Brochure with detailed info on using the Hybrid Brackets and End Plates

Product Code: RAL01554
The AquaticLife Hybrid Mounting System 16" Decor Black Endcaps provide cord management and conceal power cords on both ends of the fixture. Power cords fit inside specially designed channels made from extruded aluminum and match the profile and color of the Hybrid fixture. Includes all attachment hardware. Each pair is a complete set to outfit one fixture. The AquaticLife Hybrid 16" End Plate (15.75"), Pair are included.

NOTE: This is for the 16" units. 16" units are typically used with the AI Prime Lights.

Product Code: RAL01555
The AquaticLife Hybrid Mounting System 18" Decor Black Endcaps provide cord management and conceal power cords on both ends of the fixture. Power cords fit inside specially designed channels made from extruded aluminum and match the profile and color of the Hybrid fixture. Includes all attachment hardware. Each pair is a complete set to outfit one fixture. The AquaticLife Hybrid 18" End Plate (18.1"), Pair are included.

Product Code: RAL01556
The AquaticLife Hybrid Mounting System 24" Decor Black Endcaps provide cord management and conceal power cords on both ends of the fixture. Power cords fit inside specially designed channels made from extruded aluminum and match the profile and color of the Hybrid fixture. Includes all attachment hardware. Each pair is a complete set to outfit one fixture. The AquaticLife Hybrid 24" End Plate (23.25"), Pair are included.

NOTE: This is for the 24" units. 24" units are typically used with the EcoTech Radion XR30w or the AI Hydra 52.