The SpectraPure Enduro-DI High-Performance Mixed-Bed DI Cartridge 10", Model DI-MB-ENDI-10, is designed to produce ultra-high purity (18.2 megohm) deionized water for extended periods.
Typical mixed-bed DI cartridges can produce ultra-pure water initially, but after a short period of usage the resin’s maximum removal levels start to diminish, until with continued usage purity will finally trend below acceptable levels and the cartridge is considered “exhausted”. The EnduroDI performance curve is flatter at the top, not dropping downward until much later in the cartridge's life, and spending the majority of its lifespan at maximum removal levels, and with very little time at reduced levels prior to cartridge depletion.
When used in a multi-stage DI system, and configured as a polishing DI stage placed downstream from a MaxCap or Mega MaxCap DI roughing stage, the life of the EnduroDI increases dramatically. This translates into cost savings, with fewer replacement cartridges to buy and more ultra-high purity water production between changes.
- Standard Twist-top shell, 3in dia x 10in L, fits in virtually all standard 10inch filter housings
- Designed to produce ultra-high purity (18.2 megohm) deionized water for extended periods
- Maintains ultra-high purity water production characteristics well through the life of the cartridge
- Optimized for use as a final Polishing DI stage when used in a multi-stage DI configuration
- Removes all traces of silica, nitrates, phosphates and ionized impurities
- Extended cartridge longevity over the legacy SilicaBuster DI or conventional Mixed-Bed cartridges
- Aluminized packaging eliminates resin degradation while in storage
- Interchangeable with Captive Purity, Kent Marine, AWI, BRS, and most other residential or aquarium DI or RO/DI systems
