Product Code: RTZ15500
The Tunze SmartController 7000 is the ultimate pump and lighting controller. It works with the Tunze Turbelle Pumps fitted with an electronic motor (the DC Pumps with controllers). With the SmartController 7000 you can individually control your stream pumps through 4 separate channels that allow you to customize the overall flow and intervals and wave generator settings.

The Tunze SmartController 7000 can also control lights (Tunze LEDs only), heaters, CO2 system and many other accessories, all through WiFi. The new controller lets you connect and sync all of your accessories together through a single controller, giving you maximum control through individual channels.

Product Code: RTZ70970
The Tunze Multicontroller 7097 is a controller for all Tunze Turbelle Pumps fitted with an electronic motor (the DC Pumps with controllers) and Tunze LEDs, which can be adjusted and programmed by a computer via USB connection. It contains a microprocessor with memory and an internal real-time clock.

Product Code: RTZ65000
Plug the Tunze Controlled Power Socket 7070.120 into any wall outlet and then connect the control cables to your Tunze Smart Controller 7000 to create a full blown aquarium controller. Manage your tanks heater, CO2 system, lights, and much more. Each Power Socket comes with the control cable that has a Y-adapter already built in letting you run more Tunze lights, or pumps without requiring additional control ports on the controller.

Product Code: RTZ61000
The Tunze CO2 Valve Set 7070.200 is an electronically controlled solenoid that connects directly to the Tunze SmartController 7000. The solenoid valve plugs into one of the controllers in/out control ports. It comes with a Y adapter cable allowing you to connect another light or pump in-line to the solenoid valve with individual control. The valve can be used for almost all types of gas including CO2 and oxygen making it useful for more than just CO2 reactors.

Product Code: RTZ70975
The Tunze Moonlight Turbelle 7097.050 works with Tunze Turbelle Pumps and Controllers. When no light is available the 7097.050 photo sensor will turn your pumps down to their lowest setting automatically. When the light is on the pumps will ramp up to follow the max settings on the controller.

Product Code: RTZ70903
The Tunze Y Adapter Cable 7090.300 allows the connection of multiple pumps together to be controlled by a single Tunze SmartController 7000. Cable length - 36".

Product Code: RTZ70923
The Tunze 1.2 meter Turbelle Pump Controller Cable 7092.300 connects two Turbelle Pump Controllers for simultaneous controlling or connects one Turbelle Controller with a Tunze Multicontroller 7097 USB or Tunze SmartController 7000.