• Free Shipping on all orders over $49 • $5.99 Flat Rate Shipping on orders under $49.

  • blue_solid_circle-white_bg-svg
  • Free Shipping on all orders over $49 • $5.99 Flat Rate Shipping on orders under $49.

You are here:Home >
SpectraPure 98% Rejection RO Membrane 150 GPD (MEM-0150)

SpectraPure 98% Rejection Replacement RO Membrane 150 GPD (MEM-0150)

$
You'll earn 295 Rewards Points
  • Brand & Manufacturer:: SpectraPure RO Replacement Media
Product Code: RSP90003

Stock Status:  In Stock
NOTE: Membrane must be stored in the refrigerator if not being installed immediately

SpectraPure 98% Rejection RO Membrane 150 GPD (MEM-0150). Minimum Rejection = 98%. Stabilized Salt Rejection: 98%.- The membranes produce the rated GPD ± 20% at 60 psi. (Permeate flow and salt rejection based on the following test conditions: 250 ppm softened water source, 77°F (25°C), 15% recovery and the specified applied pressure).- Membranes must be matched with flow restrictors. Always change the flow restrictor when changing membrane size on your system.

SpectraSelect Plus membranes set the industry standards for highest rejection, flow rate, and longevity. SpectraSelect Plus 99% Rejection Membranes effectively DOUBLES post Deionizing cartridge life!

SpectraPure SpectraSelectPlus membranes are treated with a proprietary process to enhance rejection, increase production and speed rinse up times. These treated membranes are then hand-picked and individually tested for consistent ultra-high rejection. No other membrane can match the SpectraSelectPlus for long life and the ability to remove silica phosphates, nitrates, and heavy metals.

SpectraSelectPlus Membranes are standardized industry equipment and can also be used as an upgrade or replacement option for most Reverse Osmosis Systems, and are interchangeable with for most competitors residential/aquarium RO or RO-DI systems.

FEATURES:
  • Minimum Rejection = 98%. Stabilized Salt Rejection: 98%.
  • The membranes produce the rated GPD ± 20% at 60 psi. (Permeate flow and salt rejection based on the following test conditions: 250 ppm softened water source, 77°F (25°C), 15% recovery and the specified applied pressure).
  • Membranes must be matched with flow restrictors. Always change the flow restrictor when changing membrane size on your system
  • 2" x 12"
More Info Product button block
  • Please contact us with any questions you have.

  • [email protected]

    We answer all emails through 3 PM the same day (M-F).

  • (480) 491-5283

    Monday-Friday 9:00 am to 11:00 am & 1:00 pm to 3:00 pm MT. We will return all phone calls through 3 PM the same day.

    Note: we do not have daylight savings time in Arizona

Empty Cart