Product Code: RPY99989-5ft
This is the exact same hose as comes with all Python products: the No Spill Clean & Fill, Extensions and Gravel Tubes. You can replace old hose with the same length of hose, or a longer or shorter piece. Your choice. Buy in five foot increments with a maximum length of 100 feet.

Product Code: RPY02514
The Python 25 ft. No Spill Clean & Fill works with your faucet to siphon water from your tank directly into the sink, making water changes a breeze. No buckets are required!

Product Code: RPY02514-Bundle1
The Python 25 ft. No Spill Clean & Fill w/ Python Hook & 24" Extended Length Gravel Tube Package combines the: Python 25 ft. No Spill Clean & Fill; Python Hook; and Python 24" Extended Length Gravel Tube. The 24" Gravel Tube will allow you to clean the bottom of a deeper tank without getting your hands wet. The Gravel Hook replaces the Gravel Tube and holds the water line securely to the side of your tank when you refill the tank.

Product Code: RPY02514-Bundle2
The Python 25 ft. No Spill Clean & Fill and Squeeze Stressless Siphon Starter combines the Python 25 ft. No Spill Clean & Fill and the Python Squeeze Stressless Siphon Starter. The Python 25 ft. No Spill Clean & Fill can work with your faucet to siphon water from your tank directly into the sink, making water changes a breeze. However, if you choose to not use the faucet to create siphon, you can use the included Stressless Siphon Starter to create siphon.

Product Code: RPY02514-Bundle3
Water changes are critical to the success of any aquarium. The Python 25 ft. No Spill Clean & Fill is best product on the market for water changes. Any new water added to your aquarium should be treated with a water conditioner, such as the Python Multi-Purpose Water Conditioner. For new tanks, or tanks with inadequate biological filtration, it's also critical to add bacteria such as Bio-Support. And the performance of your aquarium filter will be greatly enhanced by using a product such as Bio-Clean to break down the organic waste. This package includes four Python products that work together to keep your tank sparkling clean.

Includes:

• Python 25 ft. No Spill Clean & Fill
• Python Multi-Purpose Water Conditioner 1 oz
• Python Multi-Purpose Bio-Support 1 oz
• Python Multi-Purpose Bio-Clean 1 oz

Product Code: RPY02514-Bundle4
This package combines the Python 25 ft. No Spill Clean & Fill and the Python Porter. The Python Porter is a must have accessory for anyone who is using a No Spill Clean & Fill. When storing or transporting your No Spill Clean & Fill it will keep the tubing coiled properly.

Product Code: RPY05014-Bundle4
This package combines the Python 50 ft. No Spill Clean & Fill and the Python Porter. The Python Porter is a must have accessory for anyone who is using a No Spill Clean & Fill. When storing or transporting your No Spill Clean & Fill it will keep the tubing coiled properly.

Product Code: RPY05014
The Python 50 ft. No Spill Clean & Fill works with your faucet to siphon water from your tank directly into the sink, making water changes a breeze. No buckets are required!

Product Code: RPY05014-Bundle1
The Python 50 ft. No Spill Clean & Fill w/ Python Hook & 24" Extended Length Gravel Tube Package combines the: Python 50 ft. No Spill Clean & Fill; Python Hook; and Python 24" Extended Length Gravel Tube. The 24" Gravel Tube will allow you to clean the bottom of a deeper tank without getting your hands wet. The Gravel Hook replaces the Gravel Tube and holds the water line securely to the side of your tank when you refill the tank.

Product Code: RPY05014-Bundle3
Water changes are critical to the success of any aquarium. The Python 50 ft. No Spill Clean & Fill is best product on the market for water changes. Any new water added to your aquarium should be treated with a water conditioner, such as the Python Multi-Purpose Water Conditioner. For new tanks, or tanks with inadequate biological filtration, it's also critical to add bacteria such as Bio-Support. And the performance of your aquarium filter will be greatly enhanced by using a product such as Bio-Clean to break down the organic waste. This package includes four Python products that work together to keep your tank sparkling clean.

Includes:

• Python 50 ft. No Spill Clean & Fill
• Python Multi-Purpose Water Conditioner 1 oz
• Python Multi-Purpose Bio-Support 1 oz
• Python Multi-Purpose Bio-Clean 1 oz

Product Code: RPY07514
The Python 75 ft. No Spill Clean & Fill works with your faucet to siphon water from your tank directly into the sink, making water changes a breeze. No buckets are required!

Product Code: RPY10014
The Python 100 ft. No Spill Clean & Fill works with your faucet to siphon water from your tank directly into the sink, making water changes a breeze. No buckets are required!

Product Code: RPY01316
The Python Porter is a water and mildew resistant holder/carrier for all sizes of the Python No Spill Clean & Fill. Easy Velcro closure. Keeps tubing coiled properly when not in use.

Product Code: RPY01319
The Python Squeeze is the newest addition to the Python family of products. The Stressless Siphon Starter starts with a simple squeeze and takes the stress off of you, and more importantly, does not stress your fish. It attaches easily to any siphon with the included 1/4" and 1/2" adapters.

Product Code: RPY00139
Designed for use with your No Spill Clean and Fill Aquarium Maintenance System, the Python Hook delivers a hands-free, spill-free experience every time you refill your aquarium.

Product Code: RPY00105
Python 10 ft. No Spill Clean & Fill Extension can be used to extend the length of the Python No Spill Clean & Fill. Includes male & female connectors.

Product Code: RPY00205
Python 20 ft. No Spill Clean & Fill Extension can be used to extend the length of the Python No Spill Clean & Fill. Includes male & female connectors.

Product Code: RPY24720
The Python 24" Extended Length Gravel Tube can be used by itself as a gravel vac or used with a Python No Spill Clean & Fill to replace the 12" Gravel Tube that comes stock with the No Spill Clean & Fill. It includes 28 inches of tubing and a female connector.

Product Code: RPY36720
The Python 36" Extended Length Gravel Tube can be used by itself as a gravel vac or used with a Python No Spill Clean & Fill to replace the 12" Gravel Tube that comes stock with the No Spill Clean & Fill. It includes 28 inches of tubing and a female connector.

Product Code: RPY48720
The Python 48" Extended Length Gravel Tube can be used by itself as a gravel vac or used with a Python No Spill Clean & Fill to replace the 12" Gravel Tube that comes stock with the No Spill Clean & Fill. It includes 28 inches of tubing and a female connector.

Product Code: RPY06163
The Python Pro-Clean Small has a 6" Tube with a 1" opening and a 6 ft. Hose.

Product Code: RPY16320
The Python Pro-Clean Small-Tall has a 20" Tube with a 1" opening and a 6 ft. Hose.

Product Code: RPY12163
The Python Pro-Clean Small has a 12" Tube with a 1" opening and a 6 ft. Hose.

Product Code: RPY16310
The Python Pro-Clean Small has a 10" Tube with a 2" opening and a 6 ft. Hose.

Product Code: RPY16316
he Python Pro-Clean Large has a 16" Tube with a 2" opening and a 6 ft. Hose.

Product Code: RPY16324
The Python Pro-Clean X-Large has a 24" Tube with a 2" opening and a 6 ft. Hose.

Product Code: RPY00131
The Python Replacement 13A White Faucet Adapter allows you to connect your No Spill Clean & Fill to any standard faucet. Install the Adapter when needed, or leave it attached to your faucet for more frequent use.

Product Code: RPY00132
Replacement 13B Pump for the Python 25 ft. and 50 ft. No Spill Clean & Fill.

Product Code: RPY00133
Replacement 13-C Switch (Shut Off Valve) for the Python 25 ft. and 50 ft. No Spill Clean & Fill.

Product Code: RPY00134
The Python 13D 10" Gravel Tube w/ Tail & Connector is a replacement for the one that comes with the No Spill Clean & Fill. It includes 2.5 feet tubing and a female connector for easy installation.

Product Code: RPY00076
Replacement 07-F Male Connector for the Python 25 ft. and 50 ft. No Spill Clean & Fill.

Product Code: RPY00066
Replacement 06-F Female Connector for the Python 25 ft. and 50 ft. No Spill Clean & Fill.

Product Code: RPY06984
Replacement 69-HD Brass Adaptor for the Python 25 ft. and 50 ft. No Spill Clean & Fill.

Product Code: RPY00496
The Python 49-F Brass Snap Connector is a quick disconnect between the Brass Adaptor and 13B Pump. Allows you to quickly connect and disconnect the 13B Pump from the Brass Adaptor.

Product Code: RPY06996
The Python Female Brass Adapter features 3/4" x 27 female thread, enabling you to connect your Python No Spill Clean & Fill System to newer faucets with smaller spout assemblies. Attaches to the inside thread on the standard Python 69-HD Brass Adaptor.

Product Code: RPY06995
The Python Male Brass Adapter features a 13/16" x 27 male thread, enabling you to connect your Python No Spill Clean & Fill System to newer faucets with smaller spout assemblies. Attaches to the inside thread on the standard Python 69-HD Brass Adaptor.