Home > FILTRATION > Aquarium Filtration:
RO Systems
> RO Systems: AquaticLife RO Buddie >


AquaticLife Smart Buddie Booster Pump for 50 to 100 GPD RO Systems
AquaticLife Smart Buddie Booster Pump for 50 to 100 GPD RO Systems


 
Alternative Views:


Our Price (price includes free shipping!) $134.99
You'll earn 675 points
Brand & Manufacturer: AquaticLife RO Buddie Accessory

Stock Status: In Stock

Product Code: RAL01292

Description
 
The AquaticLife Smart Buddie Booster Pump for 50 to 100 GPD RO Systems increases the pressure going into your RO or RO/DI system to make it operate more efficiently. It can also decrease the consumption of DI resin. Designed as an accessory for Reverse Osmosis units in areas with low water pressure, or for users that want maximum output and the best quality filtered water from their RO systems. The Smart Buddie booster pump is quiet, easy to install, and can significantly increase water output.

Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate on very low pressureódown to 35 psióbut the reality is you won't get a lot of water and the product water quality may be compromised if the unit runs below 45 psi. RO units typically run well on municipal water pressure of 60 psi, but they run even better with a small pump to boost the pressure to 80 psi or higher. The increased pressure will also improve the economy of the unit (it will run less reject water) as well as the quality of the water. RO units thrive on pressure. User Guide
Features:
  • The high pressure switch turns off the booster pump if the filtered water pressure is greater than 33.35 PSI, prolonging the life of the pump. Buddie Fit press-fittings make it easy to plumb tubing into the existing RO system.
  • The sealed pressure pump is low-voltage and powered by the included transformer, which ensures safe, quiet operation. Easily plumb into most reverse osmosis systems to increase water pressure up to 90 PSI and reduce waste water. RO units thrive on pressure!
  • The Smart Buddie Booster Pump includes an internal automatic flush valve that flushes the membrane for 18 seconds every time the unit is activated. Flushing clears debris build-up on the membrane, and is critical to obtaining peak performance from the RO unit. After flushing filtered water production will begin.
  • Low pressure switch turns off the booster pump if water pressure is less than 7.25 PSI, extending the life of the pump.


Browse for more products in the same category as this item:

FILTRATION > Aquarium Filtration:
RO Systems
> RO Systems: AquaticLife RO Buddie