Product Code: RHS64118

Monitor & Control Like a Pro, Even if You're a Beginner
The CoralVue Hydros Control 2 Starter Pack (HDRS-C2PK) is the first affordable and easy-to-use aquarium controller kit in the aquatic industry. This starter pack includes all essential equipment needed to monitor and control a healthy aquarium including a Control 2 device, Hydros App, power source, temperature sensor, and 4-Outlet WiFi AC Power Strip. Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. All Hydros products are engineered, assembled, and supported in the USA.

What’s Included:

• 1x Control 2 Unit
• 1x Power Supply
• 1x Temperature Sensor
• 1x 4-Outlet WiFi AC Power Strip
• Hydros App

Product Code: RHS64119
Achieve Ultimate Aquarium Control with the Hydros Control 4 Starter Pack
The CoralVue Hydros Control 4 Starter Pack (HDRS-C4PK) includes all essential equipment needed to monitor and control a healthy aquarium including a Control 4 device, Hydros App, temperature sensor, pH probe, and more. Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. All Hydros products are engineered, assembled, and supported in the USA.

What’s Included:

• 1x Control 4 Unit
• 1x Power Supply
• 1x Temperature Sensor
• 1x pH Probe & Calibration Solutions
• 1x 4-Outlet WiFi AC Power Strip
• HYDROS App

Product Code: RHS64116

Monitor & Control Like a Pro, Even if You're a Beginner
The CoralVue Hydros Control 2 CONTROLLER ONLY (HDRS-C2) is a small, general-purpose aquarium controller capable of managing and controlling all the main functions of an aquarium. NOTE: As this does not come with a power supply, it is a product that will need to be used with either the CoralVue Hydros Control 2 Starter Pack (HDRS-C2PK) or the CoralVue Hydros Wave Engine Standard (HDRS-WE). It can be plugged into the power on those devices.

Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Monitor temperature, detect leaks, power equipment, control outlets, and more with ease through the Hydros App. Control 2 can be used as a standalone controller for saltwater aquariums, or freshwater planted tanks, or it can be added to other Hydros Controls to build a more extensive system. The Control 2 operates on a Hydros Safety Net and is rated IP-65 to keep your equipment and aquatic life alive and thriving. All Hydros products are engineered, assembled, and supported in the USA.

Product Code: RHS64117

Achieve Ultimate Aquarium Control with the HYDROS Control 4
The CoralVue Hydros Control 4 CONTROLLER ONLY (HDRS-C4) is a powerful and robust aquarium controller capable of performing all essential functions needed to maintain a healthy aquarium without the need for extra expensive modules. NOTE: As this does not come with a power supply, it is a product that will need to be used with either the CoralVue Hydros Control 4 Starter Pack (HDRS-C4PK) or the CoralVue Hydros Wave Engine Standard (HDRS-WE). It can be plugged into the power on those devices.

Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Just one Control 4 can monitor temperature, pH, ORP, and water level, to name a few, and control pumps, timers, level sensors, and much more thanks to its technologically advanced design. It can be used as a standalone controller for saltwater aquariums, freshwater tanks, pond applications, or it can be added to other Hydros Controls to build a more extensive system. The Control 4 operates on a Hydros Safety Net and is rated IP-65 to keep your equipment and aquatic life alive and thriving. All Hydros products are engineered, assembled, and supported in the USA.

Product Code: RHS64108
With the CoralVue Hydros Wave Engine Standard (HDRS-WE) you can simplify the way you manage flow within your reef aquariums. A single app controls a variety of different pumps from your mobile device. You can access all the features you desire, without the need for multiple apps, individual controllers, and bulky power supplies that require a “bird’s nest” of cables and wires. NOTE: You will need a Pump Adapter or 0-10V Cable. Choose More Info for details regarding needed adapters.

Product Code: RHS64109
With the CoralVue Hydros Wave Engine with Ecotech Module (HDRS-WE-ETM) you can simplify the way you manage flow within your reef aquariums. A single app controls a variety of different pumps from your mobile device. You can access all the features you desire, without the need for multiple apps, individual controllers, and bulky power supplies that require a “bird’s nest” of cables and wires. NOTE: You will need a Pump Adapter or 0-10V Cable. Choose More Info for details regarding needed adapters.

Product Code: RHS64115
The CoralVue Hydros WiFi Power Strip (HDRS-SM-S0301) is a smart power bar designed to work with the CoralVue HYDROS platform. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

The Power 4 has 4 x 120V AC outlets and 4 x USB ports that are WiFi controllable using the free Hydros app for Android and iOS/Apple mobile devices. You can turn outlets on and off wirelessly over a 2.4 GHz WiFi frequency. The Power 4 has a range of 98’, so you can place power strips around your home without any difficulty connecting to your modem or router.

Product Code: RHS21194
The CoralVue Hydros Auto Top-Off (ATO) Kit (HDRS-ATO-200) comes with everything you need to use your Hydros device (Control 2 or Control 4) as an ATO system. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

Product Code: RHS21200
With a Hydros DC Micro Pump (HDRS-DP-200H) and a Hydros Optical Water Level Sensor (or Float Sensor), you can use the Hydros Control 2 and Control 4 as an auto top-off (ATO) system. Just plug the pump into a Drive Port and the optical water level sensor into a Sense Port on the Control 2 or Control 4 and adjust your settings in the Hydros app. You can add additional Hydros optical water level and/or mechanical float sensors to your ATO configuration for redundancy and to set high/low points. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

Product Code: RHS21195
The CoralVue Hydros Water Level Sensor (HDRS-LS-200H) plugs into any Sense Port on a Hydros device (the Control 2 or Control 4) and does not require any additional power source.

This optical sensor you can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or to detect when a dosing container needs a refill. This is also the replacement sensor for the CoralVue Hydros Auto Top-Off (ATO) Kit.

Product Code: RHS21201
The Hydros DC CO2 Solenoid Valve (HDRS-SV-12CH) is the ideal solution for controlling the CO2 flow on a calcium reactor or regulating CO2 injection into a freshwater planted tank. It’s a useful multi-purpose accessory you can use anywhere you need on/off oxygen or carbon dioxide. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

Product Code: RHS64100
The Hydros WiFi Smart Plug (HDRS-P205) is a smart power outlet designed to work with the CoralVue Hydros platform. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

Product Code: RHS21196
The CoralVue Hydros Skimmer Sensor (HDRS-SS-100H) serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

Product Code: RHS64120
The CoralVue Hydros Temperature Probe (HDRS-DS18B20) is only 1.6” long and 0.32” wide. It’s all-black solid waterproof IP68 construction is built for years of reliable service. It is a “set it and forget it” temperature monitor that requires no calibration or maintenance (except for perhaps the occasional cleaning). The Hydros Slim Temperature Sensor Probe is included with the Control 2 or Control 4, so if you need a replacement or just want to add another temperature sensor to your system, you can easily do so for a very low price.

Product Code: RHS21197
The CoralVue Hydros Point Leak Sensor is a solid surface leak detector that can sense when freshwater or saltwater is underneath it and use that information to protect your aquarium, home, or office from total disaster. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

Product Code: RHS64121
The CoralVue Hydros Rope Leak Sensor (HDRS-LKDT0011) is the first of its kind in the aquarium industry. The moment water comes into contact with it, that information can be used to alert you on your smartphone, sound an alarm, turn pumps off, and other actions that can protect your aquarium, home, or office from a total disaster. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

Product Code: RHS21198
The Hydros Temperature Sensor (HDRS-TS-100H) is an easy and affordable way to prevent your aquarium water from becoming too cold or too hot. It monitors the water temperature in your aquarium so you can keep it within the safe zone for fish, coral, and inverts. The sensor plugs into any Sense Port on a Hydros device (the Control 2 or Control 4) and does not require any additional power source. NOTE: You must have a Hydros Controller (Control 2 or Control 4) for this product.

Product Code: RHS64125
The CoralVue Hydros Rope Leak Sensor Extension (HDRS-LC1B-4) is for extending the CoralVue Hydros Rope Leak Sensor (HDRS-LKDT0011).

Product Code: RHS64102
This adapter is for attaching your CoralVue Hydros Wave Engine to the power cable of a Reef Octopus Varios or Octo Pulse Pump. Part # HDRS-WE-OCTPA.

Product Code: RHS64103
This adapter is for attaching your CoralVue Hydros Wave Engine to the power cable of a Maxspect Gyre 130/230 Pump. Part # HDRS-WE-230PA.

Product Code: RHS64104
This adapter is for attaching your CoralVue Hydros Wave Engine to the power cable of a Maxspect Gyre 150/250/280 Pump. Part # HDRS-WE-250PA.

Product Code: RHS64105
This adapter is for attaching your CoralVue Hydros Wave Engine to the power cable of a Maxspect Gyre 330/350 Pump. Part # HDRS-WE-300PA.

Product Code: RHS64106
Some pumps do not lend themselves to direct drive control with the Wave Engine due to cabling or other restrictions. But many of these pumps do offer 0-10V controllability. This CoralVue Hydros 0-10V Quad Wave Engine Pump Adapter supplies four independent 0-10V outputs to control these pumps. Part # HDRS-WE-010PA.

Product Code: RHS64107
The CoralVue Hydros Third Party (APX) Controller Wave Engine Pump Adapter allows you to connect the Wave Engine's 0-10V input port directly to a Neptune Systems Apex aquarium controller (rather than using an outlet) so you can remotely control the Wave Engine from Apex Fusion. Part # HDRS-WE-APXPA.

Product Code: RHS64111
This adapter is for attaching your CoralVue Hydros Wave Engine to the power cable of an IceCap Gyre Pump. Part # HDRS-WE-ICGPA. Part # HDRS-WE-ICGPA.

Product Code: RHS64112
This adapter is for attaching your CoralVue Hydros Wave Engine to the power cable of a Tunze Turbelle Nanostream Pump. Part # HDRS-WE-TNZPA.

Product Code: RHS64122
This CoralVue Hydros System Command Bus Cable (HDRS-CBC-0008) is 6 feet long. It allows Hydros devices to communicate and even provide power to the Control 2 and Control 4.

Product Code: RHS64123
The CoralVue Hydros Sense Port 9 ft Extension Cable (HDRS-EXT4-0010) is for Sense Accessories for the Control 2 and Control 4.

Sense Port Accessories:

• Hydros Water Level Sensor
• Hydros Skimmer Sensor
• Hydros Point Leak Sensor
• Hydros Temperature Probe
• Hydros Rope Leak Sensor
• Hydros Temperature Sensor

Product Code: RHS64124
The CoralVue Hydros Drive Port 9 ft Extension Cable (HDRS-EXT4-0009) is for Sense Accessories for the Control 2 and Control 4.

Drive Port Accessories:

• Hydros DC Micro Pump
• Hydros CO2 Solenoid Valve